What Repairs To Make On An Upside Down Car

How to Repair Car Seat Springs

by Brenda Priddy

Hemera Technologies/AbleStock.com/Getty Images

Afterwards a few years of utilize the springs in the bottom of a car seat can go worn, aptitude, damaged and even broken. If this occurs in your car, information technology is not necessary to completely supplant the seat. It is possible to repair the cleaved springs to make them strong plenty to function properly once more than. This repair method is all-time for one to three broken springs, rather than multiple springs cleaved in the same seat. If more springs are broken, it would make sense to supercede the entire seat.

Pace i

Remove the seat from the car past loosening the bolts property the seat to the floor of the car with the ratchet set or a wrench. Remove the seat and plough it upside downward. Locate the damaged spring or springs.

Pace 2

Tear abroad any material covering the lesser of the seat to reveal the springs hiding underneath. You may take to remove batting also. If the springs are bent rather than cutting, cut the spring with wire cutters at the aptitude location and rebend with pliers to match the shape of the other springs on the bottom of the seat.

Step 3

Cut off the threaded side of the drill bit. Use the reamer to drill out the within of the scrap to make it hollow. Drill out just plenty from the middle of the drill chip for information technology to fit over the broken ends of the springs. You volition probably have to try to fit the drill flake over the jump wire several times before yous become the fit right.

Stride 4

Slip the broken ends of the wire into the 2 sides of the hollowed drill bit. Solder the jump to the drill bit with the soldering iron.

Footstep 5

Wrap some safety wire around the entire spring several times. This volition aid stabilize the spring and prevent information technology from breaking the soldered seal. Agree the safety wire and the drill scrap in place with duct tape.

Supervene upon the fabric backing over the lesser of the car seat by stapling the textile in place around the edges of the seat. Render the seat back to the automobile and connect all bolts. Don't forget to reattach rubber belts and other accessories that belong with the seat.

References

Things You'll Need

Author Bio