How To Repair Compression Shower Diverter
How to Repair Your Tub and Shower Compression Faucet
Leaky faucet? Cheque out these step-by-step instructions to fix it yourself in no time.
The inner-workings of your tub and shower faucet may be a foreign concept to you, but don't let that stop you from handling repairs. A leaky faucet is i of the most mutual concerns among homeowners, so if you hear dripping, don't call the plumber all the same. Like nearly electrical, plumbing, or other handywork, repairs to your faucet are a lot easier than they seem. Follow forth with our steps beneath to salve yourself the price of professional assist.
Getting Started
Tub and shower faucets work much like sink faucets, just they are oriented horizontally rather than vertically and their parts are usually larger. A 2-handle stem shower faucet has a stalk with a washer that presses against a seat to seal off water. A three-handle unit adds a stemlike diverter to direct h2o up to the shower or downwardly to the tub spout.
Getting the parts Often leaks can be fixed but by replacing the washers. Even if you need to replace the seats or stems, it's easier to repair than to supercede an erstwhile shower faucet, because replacement requires opening the wall. If parts are hard to find, order them at a plumbing-supply store.
What You Need
- Screwdrivers
- Handle puller if needed
- Adjustable wrench or groove-joint pliers
- Stem wrench or seat wrench if needed
- Washers
- O-rings
- Seats
- New stems if needed
Step 1: Remove Handle
Before y'all brainstorm any plumbing project, shut off the h2o to the fixture you are repairing. And then, plow on the faucet until the water stops running—this lets you make certain there is no longer h2o running in the pipes. To remove the handle, pry off the decorative cap and remove the screw; utilize a hex wrench or screwdriver as needed. Lift off the handle.
Stride 2: Loosen Stem
If the stem protrudes far enough by the wall surface, loosen it with an adjustable wrench or groove-joint pliers. For a recessed stem, employ a stalk wrench.
Recessed Stalk: Using a Stem Wrench
If the stem nut is behind the wall, utilize a stalk wrench, which is a deep socket wrench fabricated to fit a bathtub stem.
Pace 3: Supplant Packing Washer
If water seeps out around the handle, supercede a worn packing washer or stuff thread packing around the stem and into the crenel backside the packing nut.
What If... The diverter leaks?
The diverter on a three-handle tub faucet is essentially a stem. When its washer presses against the seat, water cannot rise up to the showerhead and is diverted to the tub spout.
Repair a diverter by replacing the washer at the bottom and replacing any O-rings and other removable parts.
Step 4: Supercede Washer
If water drips out the spout or the showerhead, supplant a worn washer with a new i that is exactly the same size.
Step 5: Supersede Seat
If replacing the washer does non cease the leak or if washers article of clothing out quickly, remove the seat with a seat wrench and supplant it. Or grind the seat smoothen with a seat grinder.
Source: https://www.bhg.com/home-improvement/plumbing/how-to-repair-tub-shower-stem-compression/
Posted by: rosenthalovent1985.blogspot.com
0 Response to "How To Repair Compression Shower Diverter"
Post a Comment